Send inquiry
ZLP630 platform is intended for temporary applications for lifting people and their working equipment - at unlimited heights.
The model perfectly suited to lightweight applications such as painting and decorating, refurbishing, jointing and repairs, windows cleaning etc.
The complete system consists of the working platform equipped with two electric LTD hoists and the support wheels, suspended by means of steel wire ropes from a suspension structure.
Safety systems
To ensure safe operation without danger to personnel, the platform is fitted with the following safety devices:
1) Service brake incorporated in the LTD hoist.
2) Two fall arrest devices (Anti-tilt LSF safety lock) acting on the safety wire ropes.
3) Overload sensor incorporated in the LTD hoists according to EN 1808. (Option)
4) Two upper limit switches.
5) No power descent in case of power failure.
6) Emergency stop.
7) Phase controller. (Option)
Technical Information
The perfectly suited to lightweight applications such as painting and decorating, refurbishing, jointing and repairs, windows cleaning, ...
The main para. Of ZLP630 suspended platform:
1) No power descent in case of power failure.
2) Emergency stop.
3) Phase controller. (Option)
4) Rated Load: 630kg
5) Lifting Speed: 9m/min
6) Voltage-3Phase: 380V/ (415V/220V)
7) Frequency: 50Hz/60Hz
8) Power: 1.5kw×2
9) Hoist: LTD63
10) Safety Lock: LSF308
11) Dia. of Wire Rope: 4×31SW+FC-8.3mm
12) Platform Size: (2×3)×0.76×1.45m
13) Weight of Suspension Jibs: 340kg
14) Weight of Lifting Part: Aluminum310kg/Steel 450kg
15) Counter Weight: 900kg
Platform Suspension
The different variants are to be distinguished by their suspension principles. Three different stirrups allow to choose the platform the best to your requirements (type of work, type of building, maximum loads, number of persons).
End stirrup:
Fitted at the ends of the platform.
Advantages:
The most economical and lightweight version, although showing extraordinary performances.
"Frame" stirrup:
Slipped over the platform like a "frame".
Advantages:
The ends of the platform and therefor the building corners are clear and can be easily accessed, exchangeable with the upper part of the end stirrup.
"L" stirrup:
Placed at the rear of the platform behind the workers.
Advantages:
The working surface is completely clear and the whole façade can be easily accessed.
Anchoring Options
The platform applies to all types of suspension which are manufactured according to the current standards and recommendations. The EN 1808 stipulates a safety factor of 3 for anchor points and suspension structures. Rigid offers a complete range of suspension structures which can be fitted on different types of roofs: the suspension jibs or the parapet clamp.
In most applications, it is possible to use a system of mobile suspension jibs in the roof for the attachment of temporary suspended platforms.
Double-Deck Platform
The ZLP platform can be eily transformed in a double-deck platform using especially designed attachment rods.
Basic Specification
Detail Description
Descriptons of Suspened Cradle/Suspended Gondola/Building Platform:
Widely used for window cleaning,exterior construction and decoration,exterial maintenance and cleaning, installation of high billboard ,loding materials and personnel and painting wall and so on.
Our producct have Safty device (safty lock), speed reducer , emergency manual descent ,automatic levelling system, top limit switch , feeding cable is steel(the diameter include 9.1 8.3 8.6).
The length of our platform (electric) can divided to 1m, 1.5 m, 2m , 2.5m, 3m ,which can assembly interchambiable modules of platform you need
Applications of Suspened Cradle/Suspended Gondola/Building Platform:
High-rise buildings & multi-storey buildings, large tanks, bridges, dams, etc.
Building facade construction
Decorations
Cleaning
Maintenance
Advantages of Suspened Cradle/Suspended Gondola/Building Platform:
1) The length of platform can be adjusted.
2) Special platforms can be designed and made according to your specific requirements.
3) The platform's materials can be chosen:
a. High quality steel
b. Aluminum alloy
4) The working height can be adjusted.
5) The voltage and frequency can be adjusted to different countries' standard.(220V-440V / 50Hz-60Hz)
6) Simple & flexible, easy to shift & operate, safe & reliable.
7) CE, Gost, ISO9000/2001 Certification.
8) 12 months quality warranty, and good after-sales service.
9) Fast delivery and efficient service.
10) Manufacturer, factory.
We can design special products according to customers' requirement.
Our success depends on your trust and our company's credit.
Do not hesitate to contact us! Welcome!
Technical parameter
Additional Information
The model perfectly suited to lightweight applications such as painting and decorating, refurbishing, jointing and repairs, windows cleaning etc.
The complete system consists of the working platform equipped with two electric LTD hoists and the support wheels, suspended by means of steel wire ropes from a suspension structure.
Safety systems
To ensure safe operation without danger to personnel, the platform is fitted with the following safety devices:
1) Service brake incorporated in the LTD hoist.
2) Two fall arrest devices (Anti-tilt LSF safety lock) acting on the safety wire ropes.
3) Overload sensor incorporated in the LTD hoists according to EN 1808. (Option)
4) Two upper limit switches.
5) No power descent in case of power failure.
6) Emergency stop.
7) Phase controller. (Option)
Technical Information
The perfectly suited to lightweight applications such as painting and decorating, refurbishing, jointing and repairs, windows cleaning, ...
The main para. Of ZLP630 suspended platform:
1) No power descent in case of power failure.
2) Emergency stop.
3) Phase controller. (Option)
4) Rated Load: 630kg
5) Lifting Speed: 9m/min
6) Voltage-3Phase: 380V/ (415V/220V)
7) Frequency: 50Hz/60Hz
8) Power: 1.5kw×2
9) Hoist: LTD63
10) Safety Lock: LSF308
11) Dia. of Wire Rope: 4×31SW+FC-8.3mm
12) Platform Size: (2×3)×0.76×1.45m
13) Weight of Suspension Jibs: 340kg
14) Weight of Lifting Part: Aluminum310kg/Steel 450kg
15) Counter Weight: 900kg
Platform Suspension
The different variants are to be distinguished by their suspension principles. Three different stirrups allow to choose the platform the best to your requirements (type of work, type of building, maximum loads, number of persons).
End stirrup:
Fitted at the ends of the platform.
Advantages:
The most economical and lightweight version, although showing extraordinary performances.
"Frame" stirrup:
Slipped over the platform like a "frame".
Advantages:
The ends of the platform and therefor the building corners are clear and can be easily accessed, exchangeable with the upper part of the end stirrup.
"L" stirrup:
Placed at the rear of the platform behind the workers.
Advantages:
The working surface is completely clear and the whole façade can be easily accessed.
Anchoring Options
The platform applies to all types of suspension which are manufactured according to the current standards and recommendations. The EN 1808 stipulates a safety factor of 3 for anchor points and suspension structures. Rigid offers a complete range of suspension structures which can be fitted on different types of roofs: the suspension jibs or the parapet clamp.
In most applications, it is possible to use a system of mobile suspension jibs in the roof for the attachment of temporary suspended platforms.
Double-Deck Platform
The ZLP platform can be eily transformed in a double-deck platform using especially designed attachment rods.
Tpye | ZLP250 | ZLP500 | ZLP630 | ZLP800 | ZLP1000 |
Rated Load | 250 kg | 500 kg | 630 kg | 800 kg | 1000 kg |
Lifting speed | 9m/min | 9m/min | 9m/min | 9m/min | 8.7m/min |
Voltage-3phase | 380V(415V/220V) | 380V(415V/220V) | 380V(415V/220V) | 380V(415V/220V) | 380V(415V/220V) |
Frequency | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz |
Power | 1.1×1 | 1.1×2 | 1.5×2 | 1.8×2 | 1.8×2 |
Hoist | LTD50 | LTD50 | LTD63 | LTD80 | LTD100 |
Safety Lock | LSF308 | LSF308 | LSF308 | LSF309 | LSF310 |
Dia. of Wire Rope | 4×31SW+FC-8.3mm | 4×31SW+FC-8.3mm | 4×31SW+FC-8.3mm | 4×31SW+FC-9.1mm | 4×31SW+FC-10.2mm |
Platform Size(L×W×H) | 1.2×0.65×2.3M | (2.5×2)×0.76×1.45M | (2×3)×0.76×1.45M | (2.5×3)×0.76×1.45M | (2.5×3)×0.76×1.45M |
Weight of Suspension Jibs | 170kg | 340kg | 340kg | 340kg | 340kg |
Weight Of Lifting Part | 200kg(Steel) | 410kg(Steel) | 450kg(Steel) | 520kg(Steel) | 520kg(Steel) |
140kg(Aluminum) | 290kg(Aluminum) | 310kg(Aluminum) | 340kg(Aluminum) | 340kg(Aluminum) | |
Counter Weight | 350kg | 800kg | 900kg | 1000kg | 1200kg |
20`GPQty Of Package | 13 | 12 | 10 | 8 | 8 |
The weight of lifting part includes platform, hoist, safety locks and electric control system. |
Basic Specification
Lifting speed | 8~10m/min |
Lifting Height | 100m |
Voltage | 220~380V |
Frequency | 50~60Hz |
Widely used for window cleaning,exterior construction and decoration,exterial maintenance and cleaning, installation of high billboard ,loding materials and personnel and painting wall and so on.
Our producct have Safty device (safty lock), speed reducer , emergency manual descent ,automatic levelling system, top limit switch , feeding cable is steel(the diameter include 9.1 8.3 8.6).
The length of our platform (electric) can divided to 1m, 1.5 m, 2m , 2.5m, 3m ,which can assembly interchambiable modules of platform you need
Applications of Suspened Cradle/Suspended Gondola/Building Platform:
High-rise buildings & multi-storey buildings, large tanks, bridges, dams, etc.
Building facade construction
Decorations
Cleaning
Maintenance
Advantages of Suspened Cradle/Suspended Gondola/Building Platform:
1) The length of platform can be adjusted.
2) Special platforms can be designed and made according to your specific requirements.
3) The platform's materials can be chosen:
a. High quality steel
b. Aluminum alloy
4) The working height can be adjusted.
5) The voltage and frequency can be adjusted to different countries' standard.(220V-440V / 50Hz-60Hz)
6) Simple & flexible, easy to shift & operate, safe & reliable.
7) CE, Gost, ISO9000/2001 Certification.
8) 12 months quality warranty, and good after-sales service.
9) Fast delivery and efficient service.
10) Manufacturer, factory.
We can design special products according to customers' requirement.
Our success depends on your trust and our company's credit.
Do not hesitate to contact us! Welcome!
Technical parameter
Model | ZLP500(5m) | ZLP630(6m) | ZLP800(7.5m) | ZLP1000(7.5m) | |
Rated load | 500Kg | 630Kg | 800Kg | 1000Kg | |
Lifting speed | 8-10m/min | 8-10m/min | 8-10m/min | 8-10m/min | |
Platform Dimension L×W×H(mm) | 5000(2+3m)×720×1300 | 6000(1+2+3m)×720×1300 | 7500(2.5m*3)×720×1300 | 7500(3*2.5)×720×1300 | |
Lifting Height | 100 m | 100 m | 100 m | 100 m | |
Cable | 100 m | 100 m | 100 m | 100 m | |
Steel rope (specially-made) | 8.3mm | 8.3mm | 9.1mm | 8.6mm | |
Hoist | Power | 1.5KW*2 | 1.5KW*2 | 1.8KW*2 | 2.2 KW*2 |
Voltage | 380V/50Hz | 380V/50Hz | 380V/50Hz | 380V/50Hz | |
Safety lock | Permission force of impact | 30KN | 30KN | 30KN | 30KN |
Locking Cable Angle | 3°~8° | 3°~8° | 3°~8° | 3°~8° | |
Suspension mechanism(Galvanized) | Front beam overhang | 1.3~.1.5m | 1.3~.1.5m | 1.3~1.5m | 1.3~.1.5m |
Support adjustable height | 1.44~2.14m | 1.44~2.14m | 1.44~2.14m | 1.44~2.14m | |
Counterweight | 800KG | 800KG | 1000kg | 1200KG | |
20'ft container | 10 sets | 9 sets | 8sets | 8 sets | |
40'ft container | 15 sets | 14 sets | 13sets | 13 sets |
Additional Information
Payment Terms | L/C, T/T |
Minimum Order | 1 Set |
Lead Time / Delivery Time | 5 Day(s) |
Sample Available | YES Ask For Sample |
FOB Port | Shanghai |
Packing Info | Wooden case, dust prevention water proofing film package. Or according to your requirement. |
Target Market(s) | Africa(except Middle East), Central & Southern Asia, Latin America, Middle East, North America, Southeast Asia, Western & Southern Europe |