Send inquiry
Features:
1. The machine is intended for cutting straight-tooth splines with all kind of tooth shape by using hobbing method.
2. It is also used for cutting straight-tooth collecting shaft gears and straight-tooth gears, as well as cutting taper splines and stepped gears.
3. The electric cabinet separated NC form powerful electricity is mounted on the machine, it takes less area. The hob speed is adjustable from 60 to 600 r/min steplessly, but it can reach 200 to 600 r/min if power is constant.
3. In addition, dry cutting can be carried out in the condition of wind cooling.
4. This is a high efficient machine for cutting splines and gears in batches or mass production, which is suitable for automobiles, tractors and machine building industries etc.
Specification |
HMKX6016 |
Max.diameter to be machined | Φ160 mm |
Max.module to be machined | 4 mm |
Max.length of the workpiece | 3000 mm |
Max.length to be machined | 2850 mm |
Range of teeth to be machined | 4-60mm |
Center hight of machine | 370mm |
Max. size of milling cutter to be mounted | 130×200mm |
Max.travel of tailstock sleeve | 50mm |
Adjusting angle of milling head | ±15° |
No. of axes to be countrolled | 2 |
No. of axes to be followed | - |
Gears to be machined | straight teeth |
Overall dimensions (L×W×H) | 5100x1725x1990mm |
Weight of the machine | 13000kg |